DeWALT Anchors & Fasteners Wedge Anchor - 3/8" - Carbon Steel / 741 Series *POWER-STUD+ SD1
UNC Threaded Stud - Torque-Controlled - Zinc Plated Carbon Steel Body w/ Expansion Clip, Nut & Washer - For use in uncracked concrete applications
Wedge Anchor - 3/8" - Carbon Steel / 741 Series *POWER-STUD+ SD1
UNC Threaded Stud - Torque-Controlled - Zinc Plated Carbon Steel Body w/ Expansion Clip, Nut & Washer - For use in uncracked concrete applications 
Product #: PWR7415SD1
Shipping calculation is unavailable at this time. Please call 604-532-2019 for a quote.
Options: For Bolt Dia.: 3/8"; Length: 3-3/4"
Info: Head Marking: E+
$97.04 /EA
Login for contractor price
Regular: $97.04 /
PWR7410SD1 3/8", 2-1/4" Head Marking: B+ , InStock
$71.41 /100PC
PWR7412SD1 3/8", 2-3/4" Head Marking: C+ , InStock
$80.84 /100PC
PWR7413SD1 3/8", 3" Head Marking: D+ , InStock
$80.60 /100PC
PWR7414SD1 3/8", 3-1/2" Head Marking: E+ , InStock
$91.78 /100PC
PWR7415SD1 3/8", 3-3/4" Head Marking: E+ , InStock
$97.04 /100PC
PWR7416SD1 3/8", 5" Head Marking: H+ , InStock
$111.71 /100PC
For Bolt Dia.
Length
Info
PROD #
Price
3/8"
2-1/4"
Head Marking: B+
PWR7410SD1
$71.41 /100PC
3/8"
2-3/4"
Head Marking: C+
PWR7412SD1
$80.84 /100PC
3/8"
3"
Head Marking: D+
PWR7413SD1
$80.60 /100PC
3/8"
3-1/2"
Head Marking: E+
PWR7414SD1
$91.78 /100PC
3/8"
3-3/4"
Head Marking: E+
PWR7415SD1
$97.04 /100PC
3/8"
5"
Head Marking: H+
PWR7416SD1
$111.71 /100PC
Available Online: 12416
Pre Order Item
Estimated Availability Date:
Estimated Availability Date:
Availability in Store:
Please Call for Special Orders : 778-330-2602
QTY: 
BUY DIRECT
PWR7410SD1 3/8", 2-1/4" Head Marking: B+
$71.41 /100PC
PWR7412SD1 3/8", 2-3/4" Head Marking: C+
$80.84 /100PC
PWR7413SD1 3/8", 3" Head Marking: D+
$80.60 /100PC
PWR7414SD1 3/8", 3-1/2" Head Marking: E+
$91.78 /100PC
PWR7415SD1 3/8", 3-3/4" Head Marking: E+
$97.04 /100PC
PWR7416SD1 3/8", 5" Head Marking: H+
$111.71 /100PC
For Bolt Dia.
Length
Info
PROD #
Price
3/8"
2-1/4"
Head Marking: B+
PWR7410SD1
$71.41 /100PC
3/8"
2-3/4"
Head Marking: C+
PWR7412SD1
$80.84 /100PC
3/8"
3"
Head Marking: D+
PWR7413SD1
$80.60 /100PC
3/8"
3-1/2"
Head Marking: E+
PWR7414SD1
$91.78 /100PC
3/8"
3-3/4"
Head Marking: E+
PWR7415SD1
$97.04 /100PC
3/8"
5"
Head Marking: H+
PWR7416SD1
$111.71 /100PC
Product Description
The Powers Power-Stud+ SD1 Wedge Expansion Anchor is built to provide consistent performance in uncracked concrete.
Build
Consistent performance in high and low strength concrete.
The nominal drill bit size is the same as the anchor diameter.
These anchors can be set through standard fixture holes and the anchor design allows for follow-up expansion after setting under tensile loading.
Zinc plated for corrosion resistance!
Certifications, Standards, and Regulations
- ICC-ES, ESR-2818 for concrete Code cpmpliant with the 2015 IBC + IRC, 2012 IBC + IRC, 2009 IBC + IRC and the 2006 IBC +IRC
- ICC-ES, ESR-2966 for masonry Code compliant with the 2012 IBC + IRC, 2009 IBC + IRC, 2006 IBC + IRC
- ACI 355.2/ASTM E 488 and ICC-ES AC193 for use in structural concrete under the design provisions of ACI 318
- ICC-ES AC01 for use in masonry
- UL listed – File No. EX1289
- Independently tested and accredited for use in cracked and uncracked concrete including seismic and wind loading
Product Specifications
| Vendor Part #: | 7410SD1 |
| Diameter: | [3/8 inch] |
| Material: | Carbon Steel |
| Plating: | Zinc |
- √Use in Cracked and Uncracked Concrete
- √In Normal-Weight Concrete
- √In Sand-Lightweight Concrete
- √In Concrete Over Steel Decking
- √In Grouted Concrete Masonry
- Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.blackcrowfasteners.com/cs_wiki/wiki/47-i... - Product | Drill Bits, Kits & Accessories Cutting Tools built to remove material and create holes
https://www.blackcrowfasteners.com/353-Drill-Bits-Ki...
