Estimated Availability Date:
Call for Availability : 778-330-2602
The JET Pin Punch is made of the highest grade carbon steel that was accurately hardened and tempered preventing splintering and extending life.
This tool is built with a powder coated shank that protects against rust, and its edges are
accurately tempered to stay sharp.
It's ideal for driving out and removing already loosened pins and keys after initial movement by a solid or standing punch.
The extra-thick hexagonal shanks minimize roll away.
The working ends are accurately ground and hardened to HRC 52-58 for maximum service, and the striking end hardened to HRC-42 maximum, so it won’t chip or mushroom.
This tool meets Canadian Government Specifications CDA39GP-43a.
WARNING: Always Use Punches and Chisels on Materials Softer than the Hardness of the Punch Itself
WARNING: Always Wear Safety Goggles
Vendor Part #: | 775402 |
Length: | [4.75 inches] |
Point: | [1/8 inch] |
Shank Size: | [5/16 inch] |
- Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.blackcrowfasteners.com/cs_wiki/wiki/47-i...