Estimated Availability Date:
Please Call for Special Orders : 778-330-2602
The Makita Cordless Angle Grinder (DGA452RFE) is a high power, lightweight angle grinder.
This grinder has an electronic current limiter with a warning light that prevents motor burnout caused by overloading.
There is also a low battery capacity light that indicates the ideal time to recharge the battery.
The anti-restart feature prevents the accidental start-up of tool during battery changing when switch is locked in the on position.
The grinder has a conveniently located thumb switch for your comfort.
There is a removable side handle that can be mounted on either side of grinder body.
The ergonomic vertical soft RUBBER grip absorbs vibration and operates comfortably.
The following is included with this grinder:
- 2 Ea. 18V (3.0Ah) Li-Ion Batteries BL1830(194205-3)
- Charger (DC18RC)
- Battery Cover (450128-8)
- 4-1/2” Depressed Center Wheel (D-20781)
- DCW Wheel Cover (125267-0)
- 1 Ea. 4-1/2" Thin Kerf Cut Off Wheel (724115A25)
- TKCOW Wheel Cover (135103-2)
- Lock Nut Wrench (782424-9)
- Side Handle (158237-4)
- Inner Flange 45 (224399-1)
- Lock Nut 5/8"-45 (224568-4)
- Plastic Carrying Case (141257-5)
- Bonded Abrasives: A bonded abrasive is an assembly of abrasive grains bonded within a matrix to create a solid-like form.
- Li-Ion: Li-Ion (or lithium-ion) batteries are rechargeable batteries. Li-Ion batteries are built to with a high energy density and only allow a slow loss of charge when not in use. Li-Ion batteries are the most popular batter type for consumer goods, but are also popular in the aerospace, military, electric vehicle industries.
- Angle Grinder: A handheld power tool used for grinding and polishing surfaces like metal and stone. Can also be called a side grinder or disc grinder.
Vendor Part #: | DGA452RFE |
Arbor Diameter: | [5/8 inch] |
Battery: | [18 Volt] Li-Ion |
Max Grinding Wheel Capacity: | [4-1/2 inches] |
Motor: | Brushed |
Net Weight: | [5.1 lbs.] |
No Load Speed: | [10000 RPM] |
Noise Level: | [76 dB] |
Overall Length: | [12.5 inches] |
Vibration Level: | [10.0 m/s²] |
- √On the Jobsite
- √at the Construction Site
- √Buffing Metal
- √for Cutting Rebar
- √for Cutting Tile, Stone & Concrete
- √for Grinding Metal
- √for Grinding Stucco
- √Rout Out Mortar
- Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.blackcrowfasteners.com/cs_wiki/wiki/47-i...