Estimated Availability Date:
Call for Availability : 778-330-2602
Walter Surface Technologies has been a leader in surface treatment technologies for more than 60 years. It provides high-productivity abrasives, power tools, tooling, chemical solutions, and environmental solutions for the metalworking industry. Founded in 1952, Walter Surface Technologies is now established in seven countries in North America, South America, and Europe.
No customer reviews for the moment.
WALTER SURFACE TECHNOLOGIES - QUICK-STEP™ Starter Kit is built to take a metal surface from the blend welds stage up to a mirror finish. Suitable for use on stainless steel, steel, aluminum and copper alloy applications.
QUICK-STEP™
Is a metal surface finishing system built to reduce the number of products required to achieve the desired finishes. Starting with a quick-step backing pad that makes disc changes possible in a matter of seconds.
Build
Made to introduce all the different abrasive products Walter supplies for metal finishing. Complete kit will take a metal surface from the weld blending stage up to a #4 or #8 mirror finish surface.
Use a different felt disc for each paste (sold separately)
The starter kit includes
The following:
- 1x - QUICK-STEP™ backing pads with centering pin (WLT07-Q 049)
- 1x - QUICK-STEP™ Flex Flap Discs - 120 Grit (WLT07-Q 512)
- 1x - QUICK-STEP™ Interface Pads (WLT07-Q 045)
- 2x - QUICK-STEP™ XX Sanding Discs - 120 Grit (WLT15-V 412)
- 2x - QUICK-STEP™ XX Sanding Discs - 240 Grit (WLT15-V 424)
- 2x - QUICK-STEP™ Blendex Conditioning Discs - Coarse (WLT07-R 452)
- 2x - QUICK-STEP™ Blendex Conditioning Discs - Medium (WLT07-R 453)
- 2x - QUICK-STEP™ Blendex Conditioning Discs - Fine (WLT07-R 454)
- 1x - QUICK-STEP™ Felt Discs - Cotton (WLT07-T 450)
- 1x - QUICK-STEP™ High Polish Discs - Cotton (WLT07-T 454)
For use with sanders, polishers or the QUICK-STEP BIG BUFF III™ sander/polisher (WLT30-A 265)
- Coated Abrasives: A coated abrasive is an assembly of abrasive grains fixed with an adhesive to a backing material such as resin, rubber, polyester, paper, or cloth.
- Flap Disc: A flap disc is a disc that is built with overlapping layers of abrasive sheets that are bonded to a central hub. As these "flaps" wear away during use, new abrasive grains are exposed to extend the life of the disc.
- Non-Woven Abrasives: Abrasives built with synthetic entangled fibers in different shapes and forms that are impregnated with abrasive grain.
- Hook & Loop Discs: Abrasive discs with a hook & loop (Velcro) backing are tear resistant, generate less heat during use and provide quicker change times.
Vendor Part #: | 07Q953 |
Arbor: | [5/8 inch]-11 |
Attachment Type: | Hook & Loop |
Diameter: | [4-1/2 inches] |
- √For use on Stainless Steel
- √For use on Steel
- √For use on Aluminum
- √For use on Copper Alloys
- √All Around Finishing Metal
- Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.blackcrowfasteners.com/cs_wiki/wiki/47-i...