Senco Collated Wood Screws - #8 - Square / EXTERIOR
EXTERIOR - Wood to Wood - Flat Head - Type 17 Point - 2/3 Coarse Thread - #2 Square Drive - For decking, fencing, siding, docks, and tile roofing applications
Collated Wood Screws - #8 - Square / EXTERIOR
EXTERIOR - Wood to Wood - Flat Head - Type 17 Point - 2/3 Coarse Thread - #2 Square Drive - For decking, fencing, siding, docks, and tile roofing applications 
Product #: SEN08D175W
Shipping calculation is unavailable at this time. Please call 604-532-2019 for a quote.
Options: Gauge: #8; Length: 1-3/4"
Info:
Pls.Call
Available Online: 0
Pre Order Item
Estimated Availability Date:
Estimated Availability Date:
Availability in Store:
This item is sold in multiple of 800.
Minimal order quantity for this item is 800.
Call for Availability : 778-330-2602
QTY: 
BUY DIRECT
Product Description
Exterior Flat Head Wood Screw
STEEL – HEAT TREATED
✔ Exterior
*Jug or Bulk
Built for exterior wood to wood applications, decking, fencing, siding, docks, and tile roofing!
Build
- Square recess provides excellent torque transmission for high torque applications
- Flat head provides strong holding power for most wood applications
- 2/3 thread prevents gaps between the sheathing and support studs which can cause squeaks
- Type 17 point quickly penetrates wood reducing drive time
- Exterior finish exceeds 1000 hours salt spray per ASTM B117
Installation Notes
- Use a screwdriver with a precise depth sensitive clutch and speeds of up to 5000 RPM
- Over-driving may cause a weak connection or thread strip-out
- The drive is finished when the screw is just below the work surface
Fastener Properties
Certifications
| ASTM B117 Salt Spray Test |
Technical Specifications
| Ultimate Tensile (lbs) | Torsinal Strength (lbs-in) |
| 2160 | 63 |
- Flat Head: A flat head has a flat top with a countersunk bearing surface. It's available with 4 lugs to assist with countersinking, and useful for general purpose construction.
- Type 17 Point: The type 17 point has a milled slot running along the length of the screw from the point.
- Decking Screw: A decking screw is a specialized fastener designed to resist corrosion from adverse outdoor environmental conditions.
- Collated Screws: Collated Screws are fasteners connected together with holding strip. They're built to work in conjunction with a collated screw gun system to drive the fastener into a hard surface. These screws are usually used in drywall installation, deck building, framing and more.
Product Specifications
| Vendor Part #: | 08D250W |
| Color: | Green |
| Screw Drive Type: | Robertson® (Square) |
| Finish: | Exterior |
| Gauge: | #8 |
| Head Diameter: | 0.32 inches |
| Head Height: | 0.18 inches |
| Head Type: | Flat |
| Material: | Steel |
| Point Type: | Type 17 |
| Screw Gauge: | #8 |
| Screw Thread: | 2/3 Coarse |
| Tensile Strength (max): | 2160 lbs |
| Thread Count: | 8 TPI |
| Thread Length: | 1.17 inches |
| Thread Type: | Coarse |
| Torsional: | 63 lbs-in |
Product Document
- √Decking
- √Fencing
- √Siding
- √Docks
- √Tile Roofing
- Product | Personal Protection See our selection of personal protection products to keep you safe no matter the hazard!
https://www.blackcrowfasteners.com/4070-Personal-Pro... - Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.blackcrowfasteners.com/cs_wiki/wiki/47-i...
