ITW Buildex HardieBacker® Screws - T25 - Serrated Head / 234 Series *BACKER-ON®
Backer-On® cement screws are designed for attaching Hardie-Backer® cement board to wood or light gauge steel studs - ANSI compliant - For use in high moisture areas
HardieBacker® Screws - T25 - Serrated Head / 234 Series *BACKER-ON®
Backer-On® cement screws are designed for attaching Hardie-Backer® cement board to wood or light gauge steel studs - ANSI compliant - For use in high moisture areas 
Product #: BLX23411C
Shipping calculation is unavailable at this time. Please call 604-532-2019 for a quote.
Options: Length: 1-5/8"; Pack Amount: 140
Info:
$25.69 /EA
Login for contractor price
Regular: $25.69 /
BLX23411C 1-5/8", 140 , InStock
$25.69 /PACK
Length
Pack Amount
PROD #
Price
1-5/8"
140
BLX23411C
$25.69 /PACK
Available Online: 7
Pre Order Item
Estimated Availability Date:
Estimated Availability Date:
Availability in Store:
Call for Availability : 778-330-2602
QTY: 
BUY DIRECT
BLX23411C 1-5/8", 140
$25.69 /PACK
Length
Pack Amount
PROD #
Price
1-5/8"
140
BLX23411C
$25.69 /PACK
Product Description
ITW Buildex's Backer-On Screws are built to secure Hardie-backer® cement board.
Perfect for use in high moisture areas such as bathrooms and kitchens!
Build
Backer-On Screws provide the optimal fastening solution for installing fiber cement board to wood or steel framing.
These screws conform to ANSI A108.11 Standards for cement board installation.
- Serrated head designed to drive flush even at an angle
- Star drive with T-25 bit and Stikfit™ for easy one-handed installation and eliminates cam-outs
- Single Threads for Backer-On are designed for quick and smooth drives into cement boards
- Sharp points offer immediate pick-up and eliminate pre-drilling
- Patented design allows attaching close to edge on cement board, drastically reducing fractures or blowouts
- Corrosion resistance with Climacoat finish will prevent rust from bleeding into tile
- Comply with ANSI A108.11 standards as specified by cement board manufacturers – alternative options such as roofing nails and generic drywall screws are typically not specified by manufacturers nor are they ANSI compliant
- Cement Board: Cement board is built with a combination of reinforcing fibers and cement assembled into standard sheet sizes at 1/4 to 1/2 inch thick. Cement board is typically used as a tile backing board.
Product Specifications
| Vendor Part #: | 23401C |
| Certification(s) / Agency Approval(s) / Compliance: | ANSI A108.11 |
| Coating: | Green Climacoat |
| Screw Drive Type: | Star Drive |
| Head Type: | Serrated |
| Point Type: | Sharp Point |
| Screw Thread: | Single |
- √Attaching Hardie-Backer Cement Boards
- Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.blackcrowfasteners.com/cs_wiki/wiki/47-i...
